Overclocked by 600 mhz

[Smoosh]

so I tried over clocking for the first time, and got it up 600 mhz anything above and it won't start.

Is this safe to do it by this much?

Don't know if any of this information below will help determine whether it is safe or not:

It's a 2.4 ghz P4 northwood.
Multiplier X18.
FSB 170 Mhz.
1.5 Volts.

It's got the stock fan, which seems to keep it very cool

Temp1: 36 C.
Temp2: 127 C (Error I Think).
Temp3 -55 C (Also An Error).
HD0: 17 C.
HD1: 12 C.
Temp1: 28 C (Don't know why theres 2 temp1s )

So 2400 Mhz P4 to 3060.42 Mhz P4

Is this safe, and could i push it more with better cooling?

Thanks

 

[SHAWN]

Your good. If your going to push more, I would get aftermarket cooling.

 

[H4x3r]

go run prime95 for 24 hours...if it comes back clean..then you have a stable OC

 

[Smoosh]

go run prime95 for 24 hours...if it comes back clean..then you have a stable OC

Intel(R) Pentium(R) 4 CPU 2.40GHz
CPU speed: 3060.32 MHz
CPU features: RDTSC, CMOV, Prefetch, MMX, SSE, SSE2
L1 cache size: 8 KB
L2 cache size: 512 KB
L1 cache line size: 64 bytes
L2 cache line size: 128 bytes
TLBS: 64
Prime95 32-bit version 24.14, RdtscTiming=1
Best time for 512K FFT length: 15.478 ms.
Best time for 640K FFT length: 19.890 ms.
Best time for 768K FFT length: 24.574 ms.
Best time for 896K FFT length: 28.435 ms.
Best time for 1024K FFT length: 32.291 ms.
Best time for 1280K FFT length: 42.150 ms.
Best time for 1536K FFT length: 51.855 ms.
Best time for 1792K FFT length: 59.682 ms.
Best time for 2048K FFT length: 67.676 ms.
Best time for 2560K FFT length: 88.909 ms.
Best time for 3072K FFT length: 114.649 ms.
Best time for 3584K FFT length: 133.739 ms.
Best time for 4096K FFT length: 153.665 ms.
Best time for 58 bit trial factors: 9.637 ms.
Best time for 59 bit trial factors: 9.716 ms.
Best time for 60 bit trial factors: 9.677 ms.
Best time for 61 bit trial factors: 9.699 ms.
Best time for 62 bit trial factors: 10.431 ms.
Best time for 63 bit trial factors: 10.476 ms.
Best time for 64 bit trial factors: 12.767 ms.
Best time for 65 bit trial factors: 12.721 ms.
Best time for 66 bit trial factors: 12.744 ms.
Best time for 67 bit trial factors: 12.656 ms.
FATAL ERROR: Rounding was 0.4937517914, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.


That doesn't sound too good

 

[FghtinIrshNvrDi]

you've got yourself an error! Time to downclock a little...

Ryan

 

[C0RR0SIVE]

Up the Vcore slightly if its safe with your CPU.... I'm not really sure as I don't OC with Intel.... But get Everest Home Edition and check the temps.... I hate that program...

 

[gaara]

Dude, you need to read the sticky, move up your FSB by increments of 5MHz and then boot and test for prime stable for a few minutes...do this until prime fails and then increase your vcore and test for stability again...once you've reached your 24/7 speeds you need to prime95 for 24 hours to ensure this

Also make sure you aren't overclocking your ram