SHAWN
Field Engineer
- Messages
- 4,695
- Location
- Long Island, NY
http://img.villagephotos.com/p/2005-1/937073/Screenshot.jpg
I updated by bios and was able to run at 3.0 ghz (150x20), 600fsb. I upped the vcore from 1.525 to 1.550 and raised the DIMM +.01. Memory is at 2.5-3-3-7. I have 1x512 and 2x256 for a total of 1gb.
I ran everst and received these numbers stock :
Memory Read - 2518mb/s
Memory Write - 952mb/s
Latency 107.4ns
Temp @ Idle - 42C
Then I ran it at 3.0 ghz:
Memory Read 2786mb/s
Memory Write - 834 mb/s - Why did I loose speed?
Latency 96.8ns
Idle Temp - 43C - 44C
Anyone think its worth staying at this speed? Its completely stable.
I updated by bios and was able to run at 3.0 ghz (150x20), 600fsb. I upped the vcore from 1.525 to 1.550 and raised the DIMM +.01. Memory is at 2.5-3-3-7. I have 1x512 and 2x256 for a total of 1gb.
I ran everst and received these numbers stock :
Memory Read - 2518mb/s
Memory Write - 952mb/s
Latency 107.4ns
Temp @ Idle - 42C
Then I ran it at 3.0 ghz:
Memory Read 2786mb/s
Memory Write - 834 mb/s - Why did I loose speed?
Latency 96.8ns
Idle Temp - 43C - 44C
Anyone think its worth staying at this speed? Its completely stable.