Bios

Status
Not open for further replies.

vtech

Beta member
Messages
5
Hi

Can somebody tell which button do we have to use to get to BIOS, I have IBM notepad 2645-4EU.

Problem is when it is booting it just does not give me enough time to try too many buttons. It boots up way too fast....

some advice plz.

thanks
 
From boot, try these different buttons once per second....
F8, F1, Del, F10, F2

-Mike
 
BIOS

I tried all of them. But I just cannot get to BIOS. It is getting realllllly frustrating. Doesn't matter what i do it boots up properly without going to BIOS .

any other ideas plllllllllllllllllllllllllllllllllz

thanks
 
I haven't used an IBM comp before but some computers have a splash screen where it diplays the comp brand name if you see one try hitting those keys while the splash is up.

also if you have the comp documentation it should be listed in it.
 
I have model #2645-8BU. I couldn't remember how to boot up either. I went to the IBM website and looked it up. The following text is cut-and-paste from the IBM website:

"8. Press and hold the F1 key, then turn on the computer. Hold the F1key until the Easy-Setup menu appears."

Hope this helps.

Viken
 
Status
Not open for further replies.
Back
Top Bottom