Graphiccard driver freezes random while using 3D (fullscreen) applications

Status
Not open for further replies.

Metty

Beta member
Messages
3
The topic says it. When i start 3D Mark, it freezes after a random period of time. The screen goes black, but the monitor is online & recieving an picture. Alt+Tab or anything else isn't working, only reset works. Im not sure if this also appears on other applications than 3DMark 05/03.

Catalyst version: 5.7 (5.8 Crashes more often..)

The system is freshed installed.....

System Info:
Mainboard: Gigabyte GA-8N SLI Pro (nForce4 Chipset)
Graphic: ATI X800XT

-> see hardware
 
Freezing caused by the GPU is usually the result of one or more of the following three things:

1) Overheating
2) Drivers
3) PSU
 
When the grafic card crashes, its about ~65°C, so it isnt the temperature.

The newest Chipset drivers (nForce) are installed also.

The PSU could be the problem, because Speedfan says:

first line:

Vcore1: 1,23
Vcore2: 1,73
+3.3V: 3,31
+5V: 5,00
+12V: 11,84

second line:

-12V: -2,83
-5V: -8,73
+5V: 0,97
Vbat: 3,02

The values in the second line are changing all the time. Could this be the reason?
 
Status
Not open for further replies.
Back
Top Bottom