takezo3001
Baseband Member
- Messages
- 25
I'm sorry about my last thread, it was kinda tense, and curt...But I have been triing this for awhile now, with no luck!
Again I appologise for my despirate tone in my last thread.
I am using a crummy duron 700mhz win 981rst ED, as my main backup computer..I have no other access to my main machine..
To top it off, I'm using a dual boot 98/win2k Pro setup.
My win 2k PRO is 100% inoperable due to a corrupt file.
I CANNOT repair it because I lost my admin pass, I already tried repairing it using the search funtion option with my win2k install disk, and that will never work!
The ONLY option left to me is to do a complete reinstall, of which I CANNOT reformatt
{Burning120gb of info on a 700mb CD with a slow @$$ system would take too long, as you could imagine!}
All of my HDD are full to capacity..28gb+120gb
The only option to me Is to do a uninstall using this method:
EXAMPLE:
[A] Windows 2000 on the different FAT or FAT32 partition as Windows 95/98
1. Boot to Windows 95/98 [with win9x boot disk]
2. Type sys c: in MS-DOS prompt
3. remove boot.ini, bootsect.dos, ntldr, ntdetect.com and ntbootdd.sys (if exists) from c:\ |<--What do I type in dos?
4. delete pagefile.sys (usually on c |<--What do I type in dos?
5. delete hiberfil.sys (if exists |<--What do I type in dos?)
6. Delete winnt directory (the directory you installed Windows 2000) |<--What do I type in dos?
7. Delete Documents and Settings directory |<--What do I type in dos?
8. delete Program Files directory |<--What do I type in dos?
9. delete temp directory |<--What do I type in dos?
I also have the info on how to disable/delete the installation file, everythings covered except what dos commands do I use?
I NEVER used dos commands, I do not have a working knowlege of them...I'm sure someone has done a reinstallation of a dual-boot with win 98/2k pro, I'm pleading with you to share your info with me!
I'm tired of 98's blue screen! I swear when I get my 300gb..I'll never use 98 again!
.....98SE however is another story!
Again I appologise for my despirate tone in my last thread.
I am using a crummy duron 700mhz win 981rst ED, as my main backup computer..I have no other access to my main machine..
To top it off, I'm using a dual boot 98/win2k Pro setup.
My win 2k PRO is 100% inoperable due to a corrupt file.
I CANNOT repair it because I lost my admin pass, I already tried repairing it using the search funtion option with my win2k install disk, and that will never work!
The ONLY option left to me is to do a complete reinstall, of which I CANNOT reformatt
{Burning120gb of info on a 700mb CD with a slow @$$ system would take too long, as you could imagine!}
All of my HDD are full to capacity..28gb+120gb
The only option to me Is to do a uninstall using this method:
EXAMPLE:
[A] Windows 2000 on the different FAT or FAT32 partition as Windows 95/98
1. Boot to Windows 95/98 [with win9x boot disk]
2. Type sys c: in MS-DOS prompt
3. remove boot.ini, bootsect.dos, ntldr, ntdetect.com and ntbootdd.sys (if exists) from c:\ |<--What do I type in dos?
4. delete pagefile.sys (usually on c |<--What do I type in dos?
5. delete hiberfil.sys (if exists |<--What do I type in dos?)
6. Delete winnt directory (the directory you installed Windows 2000) |<--What do I type in dos?
7. Delete Documents and Settings directory |<--What do I type in dos?
8. delete Program Files directory |<--What do I type in dos?
9. delete temp directory |<--What do I type in dos?
I also have the info on how to disable/delete the installation file, everythings covered except what dos commands do I use?
I NEVER used dos commands, I do not have a working knowlege of them...I'm sure someone has done a reinstallation of a dual-boot with win 98/2k pro, I'm pleading with you to share your info with me!
I'm tired of 98's blue screen! I swear when I get my 300gb..I'll never use 98 again!
.....98SE however is another story!