cpu speed problems

[benzimm86]

wow i must have screwed something up. i tried to change the speeds of my cpu. first set it to 15x133 i did notice a major difference but then while watching a video my computer restarted. i rebooted i set cpu to 14x133 also went to control panel and turned off autoreboot. started to watch a video again and computer froze. rebooted and set it back to 13x133. started to type the previous info in to this thread and got the bsd due to a system dump. cpu currently running at 13x130 no problems so far. i also checked the event viewer and it says:
the computer has rebooted from a bugcheck. the bugcheck was: 0x1000000a (0x4d8d0004, 0x00000002, 0x00000000, 0x804dbd87). a dump was saved in c:\windows\minidump\mini081605-03.dmp

 

[Nitestick]

never put the multiplier up by two. increment by one at a time only. may take longer but its better than a fried cpu. perhaps a voltage boost is neccessary for stability or it just may not like being overclocked

 

[benzimm86]

what are the best settings for me to use to get maximum performance from my cpu. here are some things i found about my board.
CPU Frequency Select : 100 ~ 227 at 1Mhz stepping
CPU Ratio Select : auto, 6x ~ 14x
CPU Voltage Auto, 1.75v ~ 1.850v at 0.025v intervals

 

[Nitestick]

have no idea. i'm not experienced enough in overclocking to be able to tell you that. CAREFULL trial and error is the best way. it has to be carefull because you can not afford much opf the error. try altering the settings slightly each attempt, booting and then running the computer for a while and possibly running a burn-in test. keep an eye on the temps and make sure they don't approach lock-up.,

 

[benzimm86]

I think i will ask for the best settings in the overclocking board

 

[Nick]

haha this is old stuff