Athlon Xp Not Reading Correct

[MrHelpful]

Hi, i just upgraded to a athlon xp 3000 400 mhz and my mobo is only reading it at 1.7 ghz. I had to oc it to get 2.09ghz. But it wont go any higher. I have a biostar m7vig 400 mo bo

 

[gaara]

Can you post a CPU-Z screenshot of your CPU and RAM tabs?

 

[Mr. Switch]

Your Front Side Bus jumpers are in the wrong spots. you need to look in your manual or AMD's website to see what the proper jumper settings are for your new processor. once you get them into the correct places, your processor will correctly say that its an AthlonXP 3000+ on your screen when you boot your computer.

 

[jerry5739]

he said it exactly right...sometimes the website of ur mobo manufacturer will have a screenshot of how the jumpers shood be set. its much more undrstandable than the manual...

 

[PP Mguire]

Also, the FSB needs to be set at 166 and if you can change the ram make sure its set on auto. Im assuming you have pc3200 ram and if so then your cpu at 166 will read 3000+ and your ram will run at 400.

 

[MrHelpful]

Ok heres my cpu-z settings

It ssays my ram is DDR-SdRAM,768 M-Bytes,Frequency is 198.9,CAS# Latency is 2.5 clocks,RAs to CAse is 5 clocks,Ras precharge is 3 clocks,and cycle time is 7 clocks

And my motherboard can be found at-
http://www.biostar.com.tw/products/mainboard/board.php?name=M7VIG 400 (7.x)

 

[MrHelpful]

^ignore my sig,its wrong