My System was having an additional slot for VGA,probably so I stripped VGA card from another CPU and fixed it,restarted but only original monitor plugged in to original card is working.
Before that I see 2nd monitor was working,too when plugged in to original Card.
After installing 2nd VGA,I get following message:
Found New Hardware
Trident Super VGA (Made in USA)
framebuff.dll could not be found
As I don't have WIN95 Cd,I tried to browse this file into desired destination but getting this message:
The file name is not valid.
For reference:
MS Windows 95
4.00.950B
IE 4.04.72.3110.8
Computer:Authentic AMD
64 MB RAM
87% Free
PC Cards(PCMCIA): No PCMCIA Sockets installed
Moreover,I have taken Creative Sound Blaster 16 or AWE 32 Plug & Play from
another computer to try to listen sound of some game Cds,but I get
following messages:
New Hardware found:
Creative Labs Sound Blaster 16 or AWE 32 Plug & Play
The file'cspman.dll' on windows 95 CD-ROM could not be found.
Insert Windows CD-ROM into the drive select below and click ok
F:\\Windows95
OK-Cancel-Skip File-Details-Browse
Note that I am not having WIN95 CD,so I can't insert it in F.
Error Deatils:
The following error occured'The path was not found'(Error#3),Setup
could not finish opening a file on the source disk.
Source File: 'F:\WIN95\cspman.dll'
Destination File: 'C:\WINDOWS\SYSTEM\csman.dll=w_in95_11.Ca'
New Hardware Found:
The file 'vjoyd.vxd on Windows95 CD-ROM could not be found.
I tried to play installed games,but get following messages
File--\WMCI\WWAVE.CPP Line:275
MMSYSTEM 326 No Wave device that can play files in the curent format in
ins.
File VIDEO.CPP Line:2341
Later,I tried to run add new hardware wizard from control panel,it has
listed above sound blaster from Creative Lab but it is hanged up and
not adding it.
Copying these files from floppy to destination will help to add
Creative Sound Blaster.
Can anyone help me to provide advice and provide missing files?
Thanks in advance.
Before that I see 2nd monitor was working,too when plugged in to original Card.
After installing 2nd VGA,I get following message:
Found New Hardware
Trident Super VGA (Made in USA)
framebuff.dll could not be found
As I don't have WIN95 Cd,I tried to browse this file into desired destination but getting this message:
The file name is not valid.
For reference:
MS Windows 95
4.00.950B
IE 4.04.72.3110.8
Computer:Authentic AMD
64 MB RAM
87% Free
PC Cards(PCMCIA): No PCMCIA Sockets installed
Moreover,I have taken Creative Sound Blaster 16 or AWE 32 Plug & Play from
another computer to try to listen sound of some game Cds,but I get
following messages:
New Hardware found:
Creative Labs Sound Blaster 16 or AWE 32 Plug & Play
The file'cspman.dll' on windows 95 CD-ROM could not be found.
Insert Windows CD-ROM into the drive select below and click ok
F:\\Windows95
OK-Cancel-Skip File-Details-Browse
Note that I am not having WIN95 CD,so I can't insert it in F.
Error Deatils:
The following error occured'The path was not found'(Error#3),Setup
could not finish opening a file on the source disk.
Source File: 'F:\WIN95\cspman.dll'
Destination File: 'C:\WINDOWS\SYSTEM\csman.dll=w_in95_11.Ca'
New Hardware Found:
The file 'vjoyd.vxd on Windows95 CD-ROM could not be found.
I tried to play installed games,but get following messages
File--\WMCI\WWAVE.CPP Line:275
MMSYSTEM 326 No Wave device that can play files in the curent format in
ins.
File VIDEO.CPP Line:2341
Later,I tried to run add new hardware wizard from control panel,it has
listed above sound blaster from Creative Lab but it is hanged up and
not adding it.
Copying these files from floppy to destination will help to add
Creative Sound Blaster.
Can anyone help me to provide advice and provide missing files?
Thanks in advance.