dell psu.... ahhhhhh!

Status
Not open for further replies.
ive heard the the pins are in a different order on the mobo connector for dell mobos, so only a dell psu will work with a dell mobo.
 
ok. Well, that case has a opening large enough where you could install probably most PSU's. You just need to determine if your Motherboard is 20pin or 24pin.

IF that MOBO PCI express or AGP? If it's PCI express it's 24pin. If it's AGP it's most likely 20pin. Just open your case and pull out the power connector for the MOBO. Count how many pins it has. It will either be 2 rows of 10 pins or 2 rows of 12pins.

Then you can buy the correct PSU. PCP&C is the best, but you won't have to go with them.
 
it is pci-e

im going to edit and remove that picture, its messing up the thread. lol

btw: thanks alot, HAVOC2k5
 
joshd said:
it is pci-e

im going to edit and remove that picture, its messing up the thread. lol

btw: thanks alot, HAVOC2k5

I would say that you'll be fine with a PCP&C Turbo-cool 510 SLI/Express: Although expensive at $219.00 you won't need anything else. If you ever go SLI in the future, it will serve you there too.
http://www.pcpowercooling.com/products/viewproduct.php?show=T51SLI

But, i'm sure that prety much most ATX PSU's will fit in that case. You just need to make sure they are 24 pin.

Good luck
 
Status
Not open for further replies.
Back
Top Bottom