xStevey_Bx
Baseband Member
- Messages
- 33
My friend had a problem with their computer for the past week and it prevented them from using it withought removing hair. Every scrolable window would go directly to the bottom, and it would not be pulled to the top. It would not be smooth. It was frantic and you could hear the computer thrashing.
The mouse would then lag and jump and everytime it lagged there would be a beep and the computer would crawl like a snail. The beeping was like a short burst of about 15 in 5 seconds.
I wasnt sure what it was so I told him to ctrl + alt + del but there was no programs, and i ran ad aware and stuff and there was still no problems being found.
I restarted the computer and boot it in safe mode and the problem was still there. I got him to unplug the mouse and keyboard and boot the computer encase there was a fault, like a button stuck; but there was still no result.
I ran everest and i looked about and couldnt find much but when I ran the benchmarks there was no bandwidth reading or writing to memory. ( the my computer properties was showing the ram was there).
I opened the case and everything was covered in dust so i stuck the hoover in and gave it a good clean out. The cpy fan was FULL; you could pull the dust off. The memory had no dust near it though.
Do you know what was wrong with the computer becuase once the dust was removed it worked. Why would this cause this problem?
Thanks
The mouse would then lag and jump and everytime it lagged there would be a beep and the computer would crawl like a snail. The beeping was like a short burst of about 15 in 5 seconds.
I wasnt sure what it was so I told him to ctrl + alt + del but there was no programs, and i ran ad aware and stuff and there was still no problems being found.
I restarted the computer and boot it in safe mode and the problem was still there. I got him to unplug the mouse and keyboard and boot the computer encase there was a fault, like a button stuck; but there was still no result.
I ran everest and i looked about and couldnt find much but when I ran the benchmarks there was no bandwidth reading or writing to memory. ( the my computer properties was showing the ram was there).
I opened the case and everything was covered in dust so i stuck the hoover in and gave it a good clean out. The cpy fan was FULL; you could pull the dust off. The memory had no dust near it though.
Do you know what was wrong with the computer becuase once the dust was removed it worked. Why would this cause this problem?
Thanks