TheMajor
PowerQuest / Opera
- Messages
- 10,176
- Location
- Netherlands
Hi,
I tried to unlock my Athlon XP with silver laquer.
Unfortunately it didn't work quite well. My multiplier dropped from 10.5x (default) to 5.5x and depending on wich multiplier setting I configure in my BIOS it is sometimes at 5.0 or 6.5 (CPU-Z readings), even though I configured a different value in my BIOS. Most multiplier values result in a non-booting system.
How do I properly measure the resistance of the bridges using a multimeter and wich values should I get?
I searched google but I still don't get it.
I tried to unlock my Athlon XP with silver laquer.
Unfortunately it didn't work quite well. My multiplier dropped from 10.5x (default) to 5.5x and depending on wich multiplier setting I configure in my BIOS it is sometimes at 5.0 or 6.5 (CPU-Z readings), even though I configured a different value in my BIOS. Most multiplier values result in a non-booting system.
How do I properly measure the resistance of the bridges using a multimeter and wich values should I get?
I searched google but I still don't get it.