OCing Help

[Tenken]

Ok i was experimenting ocing with one of my old machines. Its a intel 2.4 ghz i was able to get it to 2.7 with no troubles but after i raised the bus just 10mhz more it wont boot up. Any help on what to do? i dont think the chip is fried =/

 

[damasta55r]

Reset the bios. Jumper setting?

 

[Jeff]

Lower the bus 10mhz???

 

[Tenken]

well it doesnt boot so i cant get into the bios to do that but i guess jumper idea.

 

[drworm2005]

Clear the cmos. If you want to continue O/Cing after that raise the VCORE and try again.

Drworm2005.

 

[Tenken]

the cpu jumpers right? ive never actually done this heh..

 

[Nissanspecv04]

remove the cmos battery from the mobo for about 10 to 15 seconds, that will reset the bios for you. Then you have to change you clock settings like time and date in your bios. Unless you have a newer mobo that has a cmos reset button on it which you just push while the computer is off and it resets it for you.

 

[drworm2005]

What type of motherboard is it.

Drworm2005.

 

[Tenken]

bah ill have to look up the model but its a Gigabyte. Ill try the battery thing though nissan

 

[Tenken]

Ok i did the battery thing it works fine now thanks.