Why can't I overclock?

[Him]

It may. hunt around the BIOS for anything related to AGP/PCI frequencies. They will probably be to auto, and you can chose to switch them from there. Set it to 66/33 mhz.

 

[reggie_da_man]

k thx a lot ill try

 

[Wayniac]

I didn't realize this until lately, but I guess my AGP frequency doesn't operate from the FSB frequency (either that, or I'm very confused). I looked, and there is a different category for adjusting the AGP frequency (which I have set to 66 MHz). huh.

 

[Apokalipse]

I have a Gigabyte 6VXE+ F9 with the same BIOS as yours.
I overclock mine using jumpers

if it doesn't work with 133MHZ, try 112 again

 

[reggie_da_man]

well the pentium III jumpers are locked, with the 8mb video card i get to 504 mhz and it runs fine when i go to 133 it doesnt load into windows. but with the 32mb video card it doesnt overclock at all. in the bios it sais its running at at 133mhz but the post screen still sais 450 mhz