Front panel USB CONNECTOR

[kopenhagen]

Does anyone know how to set up the FRONT USB connector?

I have the guide but can't figure out how to do it

I have 3 connectors:

1/ 10+, 10-, 1 GND, 1VCC/4 STRINGS

2/20+, 20-, 2 GND, 2 VCC/4 STRINGS

3/ there are 7 strings

on the MOBO, THERE ARE 9 PINS:

PIN 1/SIGNAL: VERG_FP_USBPWRO

HOW do I know which string to plug into the PIN 1???

Thanks

 

[desiboi]

Show me a picture of your motherboard, might clarify some things up.

 

[VIII]

from memory. its green white red black ??? ahh something like that

 

[idemax]

Simple

USB front panel *by default* has two inputs (means two cables connect to the motherboard). So the third cable would be the front panel (Power, Restart, Power LED, IDE LED, Speaker).

This is a simple diagram explains how to plug the connectors.

VCC = SUB_PWR = (+)
10- = Data-
10+ = Data+
GND = Ground

Explained in the attached picture (Also with colors).