Need Help

[Starius]

well anyone?

 

[Nubius]

I googled it and it was first on the list

http://www.memtest.org/

surprising how I didn't simply remember the link lol

 

[Starius]

lol ya well i found it too and anyways it said the mem was ok

 

[Nubius]

Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm............weirdness.

You should let it run for an hour or 2 though, let it do a couple passes to fully test out the RAM just to make sure, but generally if the RAM was insanely bad I'd just error right off the bat.

Anyway...........I'm kinda gettin stumped now unless you did some major hardware change without formatting your hard drive.

 

[Starius]

i formatted hard drive before installing ANYTHING

 

[Nubius]

well damn

Have you downloaded a monitoring program like motherboard monitor 5 or speedfan and checked your voltages to make sure your PSU isn't crapping out?

Use either program and run prime95 and see if any voltages drop too low

 

[Starius]

power is "ok" my software says

 

[Starius]

here is a link to my error http://support.microsoft.com/?kbid=329284

 

[Nubius]

well it's saying memory or CPU in that.

But unless your software is giving you specific voltage levels for the +12v, +3.3v and +5v line you should look into those programs I told you about to get specifics.

If your +12v is dropping to 11.5v or your +3.3v is dropping to +3 that could be causing issues

 

[Starius]

its all good every part is running at the voltage they are supposed to