Sorry for making a separate thread about my USB problem, so ill put ALL the problems im having in this thread...
First off, my case has an IEEE 1394 port on the front, and the wire looks like this:
http://hosting.redtoline.com/IMG_0430.JPG
http://hosting.redtoline.com/IMG_0431.JPG
http://hosting.redtoline.com/IMG_0432.JPG
and the IEEE 1394 looks like this on the motherboard:
http://hosting.redtoline.com/IMG_0416.JPG
Now the manual of the ASUS motherboard looks like this:
http://hosting.redtoline.com/IMG_0445.JPG
Obviously it all doesnt match up, so i am not sure what to do, i already have 1 IEEE port on the back of the motherboard, but i would like to use the one on the front of the case instead of the one that came with the motherboard that uses a PCI slot...if you can help me to figure out what pins go where, i would appreciate it, thanks
--------------------------------------------------------------------------------------
I am also having trouble with my power button, reset button, hd led, and speaker...i know this might seem noobish, but i have never build a computer before, and i dont want to make any mistakes...now does it matter which way the reset, and power buttons go, or do none of these matter which way they go, since they are just lights and buttons?
Here is what my motherboard looks like:
http://hosting.redtoline.com/IMG_0414.JPG
http://hosting.redtoline.com/IMG_0415.JPG
Now here are the power and reset switches:
http://hosting.redtoline.com/IMG_0439.JPG
http://hosting.redtoline.com/IMG_0440.JPG
Now does the KSP mean anything on the back?
Here are the LED wires:
http://hosting.redtoline.com/IMG_0433.JPG
http://hosting.redtoline.com/IMG_0437.JPG
Here is the speaker wire:
http://hosting.redtoline.com/IMG_0442.JPG
http://hosting.redtoline.com/IMG_0444.JPG
And finally, here are the manual pictures:
http://hosting.redtoline.com/IMG_0447.JPG
http://hosting.redtoline.com/IMG_0448.JPG
http://hosting.redtoline.com/IMG_0449.JPG
------------------------------------------------------------------------------------
Again i will put my USB problem, but with more details...
Here is the motherboard picture:
http://hosting.redtoline.com/IMG_0409.JPG
And here is what the USB cords look like on the case:
http://hosting.redtoline.com/IMG_0426.JPG
http://hosting.redtoline.com/IMG_0427.JPG
Now also, here is the manual picture, and it calls that extra pin, NC, what does that mean?
http://hosting.redtoline.com/IMG_0450.JPG
------------------------------------------------------------------------------------
Lastly, i have 2 plugs in the front on my case, a headphone jack, and a microphone jack, the wire for the case looks like this:
http://hosting.redtoline.com/IMG_0428.JPG
but i have no idea where it is supposed to go on my case...
-------------------------------------------------------------------------------------
If you can help me with any of these problems, i would REALLY appreciate it, thanks in advance
Nick
First off, my case has an IEEE 1394 port on the front, and the wire looks like this:
http://hosting.redtoline.com/IMG_0430.JPG
http://hosting.redtoline.com/IMG_0431.JPG
http://hosting.redtoline.com/IMG_0432.JPG
and the IEEE 1394 looks like this on the motherboard:
http://hosting.redtoline.com/IMG_0416.JPG
Now the manual of the ASUS motherboard looks like this:
http://hosting.redtoline.com/IMG_0445.JPG
Obviously it all doesnt match up, so i am not sure what to do, i already have 1 IEEE port on the back of the motherboard, but i would like to use the one on the front of the case instead of the one that came with the motherboard that uses a PCI slot...if you can help me to figure out what pins go where, i would appreciate it, thanks
--------------------------------------------------------------------------------------
I am also having trouble with my power button, reset button, hd led, and speaker...i know this might seem noobish, but i have never build a computer before, and i dont want to make any mistakes...now does it matter which way the reset, and power buttons go, or do none of these matter which way they go, since they are just lights and buttons?
Here is what my motherboard looks like:
http://hosting.redtoline.com/IMG_0414.JPG
http://hosting.redtoline.com/IMG_0415.JPG
Now here are the power and reset switches:
http://hosting.redtoline.com/IMG_0439.JPG
http://hosting.redtoline.com/IMG_0440.JPG
Now does the KSP mean anything on the back?
Here are the LED wires:
http://hosting.redtoline.com/IMG_0433.JPG
http://hosting.redtoline.com/IMG_0437.JPG
Here is the speaker wire:
http://hosting.redtoline.com/IMG_0442.JPG
http://hosting.redtoline.com/IMG_0444.JPG
And finally, here are the manual pictures:
http://hosting.redtoline.com/IMG_0447.JPG
http://hosting.redtoline.com/IMG_0448.JPG
http://hosting.redtoline.com/IMG_0449.JPG
------------------------------------------------------------------------------------
Again i will put my USB problem, but with more details...
Here is the motherboard picture:
http://hosting.redtoline.com/IMG_0409.JPG
And here is what the USB cords look like on the case:
http://hosting.redtoline.com/IMG_0426.JPG
http://hosting.redtoline.com/IMG_0427.JPG
Now also, here is the manual picture, and it calls that extra pin, NC, what does that mean?
http://hosting.redtoline.com/IMG_0450.JPG
------------------------------------------------------------------------------------
Lastly, i have 2 plugs in the front on my case, a headphone jack, and a microphone jack, the wire for the case looks like this:
http://hosting.redtoline.com/IMG_0428.JPG
but i have no idea where it is supposed to go on my case...
-------------------------------------------------------------------------------------
If you can help me with any of these problems, i would REALLY appreciate it, thanks in advance
Nick