PSU question

Status
Not open for further replies.
Antec true 550w!! ima get a used one of those, someone plz tell me what i needa know when installing it and taking out the old one. i dont wnana blow anythin up and ima nub
 
well i found a 550W slightly used for 70 dollers, is there anything i should know when installing this? i dont wanna blow my mother board or something stupid.
 
Read the manual completely, more than once. The
PSU and motherboard manuals.

Dont plug anything into the wall until you know
everything is correct-double check.

Before you put the PSU in the case, hold it in your
hands and know what all the connectors are for
and where they go on your motherboard, drives etc.

Double check the PSU voltage switch on the back of the
PSU to make sure its set for your part of the world.
Mine is set for (115V-USA) and not (230V-EU)........

Take your time and dont lick your power supply when
its plugged in.

By the way. Dont buy a used power supply. Save up
and get a new one if you can.

350 watts used to be the norm, but IMO, 500 should
be the new norm for the PSU.
 
Status
Not open for further replies.
Back
Top Bottom