Hey guys I posted a while ago and got no help, but still have the problem.
The specs of my system are in my signature, and I have run Memtest for about 12 hours without errors.
No matter what configuration I use it gives me the same problem. I want to use both of my sticks of RAM but the problem is my system is only takign one at a time - and hating dual channel. Im usually able to get to the login screen in windows, but the following data is the same posted on the ABIT site where I receieved no assistance as well:
>>>>>>>>>>>><<<<<<<<<<<<<<
Okay so I set all the DRAM setting to automatic, pumped up the Ram voltage to 2.8 (thats up .15 and the max it will allow), and I cant even get into windows.
The message:
STOP: c000021a {Fatal System Error}
The Windows subsystem process terminated unexpectedly with a status of 0x0000005 (Two similar numbers here...).
The system has been shut down.
That is the entire message accross the blue screen.
------------------
The second thing I tried was setting the Ram setting by SPD as opposed to Manual or Auto.
I got to the logon screen where I entered my password and the computer froze for a bit, and then showed a popup (not getting me past the logon screen), giving the information that the System is being shut down by the process _______. And it counted down from 60 seconds.
The details provided the following information:
lsass.exe error.
Status code: 1073741819
Plus some elaboration that doesn't help.
-----------
Thirdly I have the Ram setting to Manual, and have the Timings @ 2.5-3-3-10 1T DDR400.
I enter my password at the login screen and am able to get to my desktop. Here im told about a LSA Shell Export Version that needed to close, So I send the error to microsoft. A second laterI am confronted with the infamous error:
STOP: 0x0000008E ( 0xC0000005, some other numbers)
There is no process listed
--------
Fourthly I set all the setting as same as above, but instead of 1T i use Auto (i have 1T, 2T, and Auto). I get to login screen and enter my password. Windows loads but immediatly crashes giving me the following error:
STOP: 0x00000050 ( 0xF000E899, some other numbers)
No process listed.
---------
So I hit my restart button (as i have throughout the process) and it hangs on a blank screen, and proceeds to beep in a High(beep)-Low(beep) pattern, about a pair of each per second.
A complete shut down and restart gets me POSTing.
-----------
Running out of options I decide to start this time with Manual RAM settings, AUTO command rate (not 1t or 2t), and 2.5-2-2-5 timings (the natural timings from my ram). I get to the Login screen and its alost like im clicking on nothing, because nothing responds to my clicks.
Then the error shows: (not blue screen, but a popup)
The same as above with the lsass process:
The details provided the following information:
lsass.exe error.
Status code: 1073741819
Micosoft is no help and im at a complete loss having tested all hardware. I'm hoping one of you can come up with some last computer-saving idea that may help me resolve this, because at the moment the computer is completely useless.
Both sticks work alone and both work together in another non-64bit system. FYI my Voltage readings from the PSU are Very accurate and the Wattage (550) will suffice.
Thanks for reading this beast of a post, but it is a beast of a problem.
The specs of my system are in my signature, and I have run Memtest for about 12 hours without errors.
No matter what configuration I use it gives me the same problem. I want to use both of my sticks of RAM but the problem is my system is only takign one at a time - and hating dual channel. Im usually able to get to the login screen in windows, but the following data is the same posted on the ABIT site where I receieved no assistance as well:
>>>>>>>>>>>><<<<<<<<<<<<<<
Okay so I set all the DRAM setting to automatic, pumped up the Ram voltage to 2.8 (thats up .15 and the max it will allow), and I cant even get into windows.
The message:
STOP: c000021a {Fatal System Error}
The Windows subsystem process terminated unexpectedly with a status of 0x0000005 (Two similar numbers here...).
The system has been shut down.
That is the entire message accross the blue screen.
------------------
The second thing I tried was setting the Ram setting by SPD as opposed to Manual or Auto.
I got to the logon screen where I entered my password and the computer froze for a bit, and then showed a popup (not getting me past the logon screen), giving the information that the System is being shut down by the process _______. And it counted down from 60 seconds.
The details provided the following information:
lsass.exe error.
Status code: 1073741819
Plus some elaboration that doesn't help.
-----------
Thirdly I have the Ram setting to Manual, and have the Timings @ 2.5-3-3-10 1T DDR400.
I enter my password at the login screen and am able to get to my desktop. Here im told about a LSA Shell Export Version that needed to close, So I send the error to microsoft. A second laterI am confronted with the infamous error:
STOP: 0x0000008E ( 0xC0000005, some other numbers)
There is no process listed
--------
Fourthly I set all the setting as same as above, but instead of 1T i use Auto (i have 1T, 2T, and Auto). I get to login screen and enter my password. Windows loads but immediatly crashes giving me the following error:
STOP: 0x00000050 ( 0xF000E899, some other numbers)
No process listed.
---------
So I hit my restart button (as i have throughout the process) and it hangs on a blank screen, and proceeds to beep in a High(beep)-Low(beep) pattern, about a pair of each per second.
A complete shut down and restart gets me POSTing.
-----------
Running out of options I decide to start this time with Manual RAM settings, AUTO command rate (not 1t or 2t), and 2.5-2-2-5 timings (the natural timings from my ram). I get to the Login screen and its alost like im clicking on nothing, because nothing responds to my clicks.
Then the error shows: (not blue screen, but a popup)
The same as above with the lsass process:
The details provided the following information:
lsass.exe error.
Status code: 1073741819
Micosoft is no help and im at a complete loss having tested all hardware. I'm hoping one of you can come up with some last computer-saving idea that may help me resolve this, because at the moment the computer is completely useless.
Both sticks work alone and both work together in another non-64bit system. FYI my Voltage readings from the PSU are Very accurate and the Wattage (550) will suffice.
Thanks for reading this beast of a post, but it is a beast of a problem.