USCB 2.0 Connector set up????

[SamBarry]

ok...i don't know where all the plugs go for the USB 0.2 Connector on the motherboard. in the manual its set out like this:

USB_POWER | P-5 | P+5 | GND | DUMMY
USB_POWER | P-4 | P+4 | GND |

but the leads are labelled +5V, -DATA, + DATA, GND and there's two fo these cables

Where do they all go?

For USB_POWER i've used a 2 pin connector labelled POWER SW, is this correct?

 

[m3trj]

I had trouble with this as well. You need to connect +5V to USB power, and GND to GND, and the -DATA and +DATA to the P-5 and P+5, and leave the dummy pin. At least this is what I think. You must be very careful to plug it in the right way round so maybe someone else can confirm this.