Heres my problem, since i got my sister a newer pc i took her old hp pavillion pentium 2 celeron off her hands. now my intentions with this were tunring it into a little router/server but i really didnt like having to work on it becasue the case was incredibly small and clutered so i decided ide switch it to a much bigger case i had laying aorund. so i take everything out and move it into the new case with all the orignal parts except for the switch i plug it in then press the switch and i get nothing yet oddly when i plug the network card in the light shows up as if its powered on. so i figured it must be a bad switch so i pull out the original switch basically destroying the case and mod it into the new case and for some reason that is beyond me it still refuses to power on. now i know the jumpers are not in the incorrect place since it is the same switch and they are put in the same way in fact with how it is i cant put it in the wrong place as it is all melded into one unit. i have no idea why the computer wont turn on and ide really appreciate and help i can get.