jrdachshund
Beta member
- Messages
- 5
i am a first-time builder and i'm having trouble wiring the "front" ports (which are actually on the top) in my raidmax scorpio 668 to my gigabyte GA-K8NSNXP-939 mobo.
for the usb ports, my mobo manual gives this layout:
(2) . . . . . (10)
(1) . . . . (9)
pin1=power, pin2=power, pin3=USB Dx-, pin4=USB Dy-, pin5=USB Dx+, pin6=USB Dy+, pin7=GND, pin8=GND, pin9=no pin, pin10=NC
and the 10 wires from my 2 usb ports on the case are: VCC(red), USB1-(white), USB1+(green),and 2 black GND wires, and the other 5 are the same except labeled USB2 instead of 1. the VCC, USB-/+ and one GND are connected in a block of 4 and the other GND is loose
for the firewire port, my mobo manual gives this layout:
(2) . . . . . (10)
(1) . . . . (9)
pin1=TPA2+, pin2=TPA2-, pin3=GND, pin4=GND, pin5=TPB2+, pin6=TPB2-, pin7=no pin, pin8=power, pin9=power, pin10=GND
and the 7 wires from the port on my case are: TPA+(orange), TPA-(blue), TPB+(pink), TPB-(green), VP(white), VG(black), and GND(black). all wires are separate
i don't think the audio hookups will fit, but i don't really care, i just want the usb and firewire
this might be a stupid question, but like i said, this is my first build.
anyway, any help or suggestions would be greatly appreciated, thanks
for the usb ports, my mobo manual gives this layout:
(2) . . . . . (10)
(1) . . . . (9)
pin1=power, pin2=power, pin3=USB Dx-, pin4=USB Dy-, pin5=USB Dx+, pin6=USB Dy+, pin7=GND, pin8=GND, pin9=no pin, pin10=NC
and the 10 wires from my 2 usb ports on the case are: VCC(red), USB1-(white), USB1+(green),and 2 black GND wires, and the other 5 are the same except labeled USB2 instead of 1. the VCC, USB-/+ and one GND are connected in a block of 4 and the other GND is loose
for the firewire port, my mobo manual gives this layout:
(2) . . . . . (10)
(1) . . . . (9)
pin1=TPA2+, pin2=TPA2-, pin3=GND, pin4=GND, pin5=TPB2+, pin6=TPB2-, pin7=no pin, pin8=power, pin9=power, pin10=GND
and the 7 wires from the port on my case are: TPA+(orange), TPA-(blue), TPB+(pink), TPB-(green), VP(white), VG(black), and GND(black). all wires are separate
i don't think the audio hookups will fit, but i don't really care, i just want the usb and firewire
this might be a stupid question, but like i said, this is my first build.
anyway, any help or suggestions would be greatly appreciated, thanks