Okay here goes:
I got the 2600+ barton 512 L2 up to 2.21ghz from 1.92.
My temps rang from 29 idle to 35 under 90% load.
Using a FSB of 384. And the ram I'm using is Corsair 400mhz 3200CLP2 (not XL). None the same, the standard cpu FSB is 333.
I have both the speeds at 192 (*2 = 384mhz).
Anyways, at 3mhz more than the point i'am at, i simply am in a loop of booting, and looking at XP home load, and then computer restarts.
There is NO REASON I can think of why the computer cannot boot with a temp like i posted above.
I did notice, however, that my MB was a lot hotter than cpu, when cpu is around 27, MB is almost 80C. I don't think that is right.
I cannot touch the multiplier on my motherboard either, so I'm kind of out of ideas.
Any help would be appreciated, thanks.
I got the 2600+ barton 512 L2 up to 2.21ghz from 1.92.
My temps rang from 29 idle to 35 under 90% load.
Using a FSB of 384. And the ram I'm using is Corsair 400mhz 3200CLP2 (not XL). None the same, the standard cpu FSB is 333.
I have both the speeds at 192 (*2 = 384mhz).
Anyways, at 3mhz more than the point i'am at, i simply am in a loop of booting, and looking at XP home load, and then computer restarts.
There is NO REASON I can think of why the computer cannot boot with a temp like i posted above.
I did notice, however, that my MB was a lot hotter than cpu, when cpu is around 27, MB is almost 80C. I don't think that is right.
I cannot touch the multiplier on my motherboard either, so I'm kind of out of ideas.
Any help would be appreciated, thanks.