the motherboard manual says for dual channel memory put them in dimm1 and dimm2, which was what i had them in, but the clips on either side of the ram slot are not clipping the ram into place.
EDIT: I booted up the pc with no ram in it, and it makes the same beeeep bbb noise. Does this mean one of my memory modules is corrupt, or both?
The 2 digit display on the motherboard had this on it (with no ram)
0.2
87
9C (beeep bbb)
9F
p.s. is there a trick to getting the ram into the slot, as in the manual it says that it clicks into place, but it is not. (a friend put the ram in for me)