Nubius
Golden Master
- Messages
- 11,599
Blind_Arrow don't scare the guy out of attempting a CPU install. They really aren't as hard as he makes it sound like it is. The CPU Sockets now-a-days use whats called 'ZIF' technology which stands for 'zero insertion force' You take off the heatsink and simply lift the lever next to the socket. This releases the CPU and you can pull it out. Put in your new CPU and it should drop right in. Then simply pull the lever back down.
Stock heatsinks have thermal pads on it, but if you had an aftermarket heatsink then you can use some good thermal paste instead. If you were trying it for the first time though I'd say just put on the stock heatsink to get used to it.
Unless you really bear down on those CPU Dies they aren't really that easy to break. I stabbed at an old processor multiple times with a screwdriver and couldn't get the stupid thing to crack when I was trying. As long as you set the heatsink STRAIGHT down onto the processor then lock everything down you're good to go.
The biggest part of changing out the processor is simply getting over the fear like you're holding the cure to aids in a very breakable glass tube while balancing ontop of a 100ft tall pole or something.
But the XP's and whatnot simply need a steady hand and good eye to not stab your motherboard which is what generally happens to people who don't know what they are doing.
Stock heatsinks have thermal pads on it, but if you had an aftermarket heatsink then you can use some good thermal paste instead. If you were trying it for the first time though I'd say just put on the stock heatsink to get used to it.
Unless you really bear down on those CPU Dies they aren't really that easy to break. I stabbed at an old processor multiple times with a screwdriver and couldn't get the stupid thing to crack when I was trying. As long as you set the heatsink STRAIGHT down onto the processor then lock everything down you're good to go.
The biggest part of changing out the processor is simply getting over the fear like you're holding the cure to aids in a very breakable glass tube while balancing ontop of a 100ft tall pole or something.
Why do you need special skills for XP's or earlier? I like these more than I do the AMD64 heatsinks that require you to remove a backplate in order to change the heatsink, but it is easier to get the heatsink off since all you have to do is unscrew the screws in order to loosen it in the event of CPU replacement.specially as if u r on AMD Athlon XP or earlier
But the XP's and whatnot simply need a steady hand and good eye to not stab your motherboard which is what generally happens to people who don't know what they are doing.