[Project Log] TOXIC CHROME (modded Corsair 250D)

alexciobanu · Apr 12, 2015

Hi guys,

Alex here from Simple Modz, just joined the forums to share a new project that I'm starting to work on!

Welcome to the build log for TOXIC CHROME where I will be modding and building a custom water cooled system in the Corsair 250D!

Huge thanks to MNPCTECH as they will be providing me with some modding supplies for the build as well as ModGuru who will be supplying the custom sleeved cables and RGB LED strips. Also thanks to GGF Lan Party for providing the Corsair 250D case for me!

As the name suggests there will be chrome! The case will be painted a combination of chrome and blue, chrome for the outside panels and blue for the case frame. I will also be painting other components such as the radiators chrome too. I'm not exactly sure yet how I'm going to get the chrome paint done and if I will be able to do it myself with spray paint as that would be the only option if I was to paint it myself. I would sure love to do chrome plating but that would probably be way out of my reach to get the entire outside of the case done. I will be doing some research for the best and most efficient way to get the nice mirror chrome look that I'm after. Of course I'm open to suggestions so if anyone has any ideas please let me know.

I think the combination of chrome and blue will be really nice and the idea for the build is to see how friendly the Corsair 250D is to a custom watercooling loop and to fit as much water cooling components as I can in it and to just make it look radioactive with a glow from the inside. The mods to the case won't be that hard to do, mainly cutting new side panel windows and I will also be playing with MNPCTECH's nibbler tool and some aluminum sheets! The hard part will be getting all the components and custom loop in the way I imagine it. The 250D is smaller than the Bitfenix Prodigy I worked on with my Vault Boy build so this will be interesting.

You will see the same attention to detail as I have shown in my previous builds with Vault Boy and Green Molecule.

Here are the SPECS:

Case - Modded Corsair 250D
Motherboard - Gigabyte GA-Z97N-Gaming 5
CPU - Intel Pentium Anniversary Edition G3258
GPU - EVGA GTX 670
Memory - 2 x 4GB G.Skill RipJaws 1600Mhz
SSD - 120GB Corsair Force GT
PSU - Corsair RM650 80Plus Gold

Cables - ModGuru custom sleeved cables

Radiators - Alphacool NexXxoS Full Copper ST30 240mm, Alphacool NexXxoS Full Copper UT60 140mm
Fans - 2 x 120mm Gelid Slim 12 UV Blue fans, 1 x 140mm Gelid Wing 14 UV Blue, 2 x 80mm Gelid Wing 8 UV Blue
Pump - Swiftech MCP35X with EK-DDC Heatsink Housing and EK-DDC XRES 140 CSQ pump top and reservoir combo
Reservoir - EK-RES X3 250 Reservoir
Fittings - Primochill Rigid Ghost Black fittings, various Bitspower matte black extension and angle fittings
Tubing - Primochill Rigid Clear PETG
CPU Block - EK-Supremacy CSQ Polished Nickel Plexi
GPU Block - EK-FC670 CSQ Polished Nickel Plexi
RAM Block - EK-RAM Monarch X2 CSQ Polished Nickel Plexi
Coolant - Mayhems X1 UV Clear Blue

Lighting - ModGuru RGB LED Strips

But first, lets get the case ready!

Here's a quick look at the case and the layout for some components. Ignore the gold paint job as that's what the guys over at GGF had it for a custom system.

Pump with the EK 140 res mounted next to the rad here

Another EK 250 res mounted horizontally here, will get rid of the drive cages and cut out a nice window for it.

So the 250 res will be right underneath the 240 radiator

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:EnableOpenTypeKerning/> <w

ontFlipMirrorIndents/> <w:OverrideTableStyleHps/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]-->

iFargle · Apr 12, 2015

Always love seeing posts like this. Can't wait for more :thumbsup:

carnageX · Apr 12, 2015

Awesome, can't wait to see how it progresses! Keeping an eye on this.

Sent from my HTC One

alexciobanu · Apr 14, 2015

carnageX said:
Awesome, can't wait to see how it progresses! Keeping an eye on this.

Thanks mate

alexciobanu · Apr 16, 2015

iFargle said:
Always love seeing posts like this. Can't wait for more

Thanks mate

alexciobanu · Apr 17, 2015

Hey guys,

Here's an update on Toxic Chrome!

Dismantled as much of the case as I could and starting to drill the mounts for everything. Gonna get all the drilling and cutting done on the case before I get it painted. I might just get the whole thing powder coated, frame and other bits blue and then the outside panels chrome. I found a place that does chrome powder coating and it's gonna be cheaper than actually buying the paint and spraying it myself so that's good. Hopefully the chrome comes out good, we will have to see about that!

So here's the naked frame of the case pretty much.

.

And just having a look how the 250 res is gonna sit and already there is a problem with the res holders. The res fits between the side of the case and the radiator without the holders but not with them unfortunately.

So what I did is broke off one side of the res holders and gonna sit the res in like that, supporting it with the holders on one side and with the case panel on the other. Also once I get fittings between it and the 240 rad, it should stay in place quite nicely.

I think it looks pretty good in there. Just need to get all the side and top windows cut now and mount the other res along with the pump.

Thanks for checking it out!

Cheers,

Alex

Gabis1207 · Apr 17, 2015

Seeing threads like this makes me sad that I don't have the creativity, patience, nor the tools to make my own modded cases.

Can't wait to see how this turns out!

alexciobanu · Apr 18, 2015

Gabis1207 said:
Seeing threads like this makes me sad that I don't have the creativity, patience, nor the tools to make my own modded cases.

Can't wait to see how this turns out!

Thanks mate! Hopefully this build log will inspire you to do some mods

alexciobanu · Apr 21, 2015

Hey guys,

Worked on getting the side panel window cut outs done for all the windows I will attach to the case, a total of three.

I will be bolting the clear acrylic this time and I will have it on the outside of the case. That is so I can keep the inward part where the grill on the side panel is. I have seen other people do it before and I think it looks interesting.

Here we go with the dremel and jigsaw!

Thanks for checking it out and I hope you like my window designs.

Cheers,

Alex

alexciobanu · Apr 28, 2015

Hey guys,

New update for TOXIC CHROME!

Just a quick look at the pump and other res combo that will be going in the build and how it will be placed.

Swiftech MCP35X

Changing to a multi option top so that I can run the loop back to the top of the res.

These EK reservoirs looks awesome, first time using these!

Great little combo!

I think it will be pretty awesome with the two reservoirs in this little case!

Thanks for checking it out!

Cheers,

Alex

[Project Log] TOXIC CHROME (modded Corsair 250D)

alexciobanu

Baseband Member

iFargle

Linux / HPC / K8s SME

carnageX

Private Joker,

alexciobanu

Baseband Member

alexciobanu

Baseband Member

alexciobanu

Baseband Member

Gabis1207

Awkward moment when...

alexciobanu

Baseband Member

alexciobanu

Baseband Member

alexciobanu

Baseband Member

Similar threads