spoonjarspoon
Solid State Member
- Messages
- 13
- Location
- England
Any tips on getting said integrated graphics working again?
May have ruined the pc I spent months saving up for.
- Thread starter spoonjarspoon
- Start date
spoonjarspoon
Solid State Member
- Messages
- 13
- Location
- England
ok then. you had enay tips for getting said integrated graphics working again?
Joe C
Golden Master
- Messages
- 5,006
- Location
- Great Lakes State
Resetting your bios to it's default by removing the cmos battery should re-enable the on board video. Try removing the battery for about a 1/2 hour and then see if it re-sets. You'll need to re-set the bios date and time once it does go back to it's default settings.
Last edited:
PP Mguire
Build Guru
- Messages
- 32,592
- Location
- Fort Worth, Texas
Need to know what motherboard you have.
spoonjarspoon
Solid State Member
- Messages
- 13
- Location
- England
It's a GIGABYTE F2A55M-HD2
Your motherboard manual says you can clear the CMOS by touching the pins with a metal instrument, such as a screwdriver, for a few seconds. You should see something that says "clear_cmos" on the side of the motherboard labelled F Panel where you can do this. That should get your bios to factory settings. And like a poster before me said, go to the GPU manufacturer website to download up to date drivers.
Similar threads
