External 250 GB HD

Status
Not open for further replies.

QBA

Baseband Member
Messages
50
Hi

Guys I'm using a 250 GB WD in a USB 2 external enclosure, when I connect the external HD case in my USB 2 port, windows XP finds the hard drive on the icon of the task bar that represent that a external device have been installed, but it can't find it on my computer.

I have tried changing the jumper on the HD as slave or master but not results, any ideas?

Thanks

Alex
 
Thanks the major, I did what you said and "Disk Managment kind see the external HD

By the way this hard drive was installed before in one of my IDE cables inside my machine and it works totally fine with windows
 
nope because "Disk Managment" doesn't find the HD, once connected in the USB enclosure, but windows XP totally read the drive if connected to one of the IDE internal cable
 
Yes windows Recognize that a Storage Device 250 Gb have been installed it but only in the icon that it display beside the clock on the task bar
 
I have the same exact problem with my Lexar 64MB JumpDrive on this one computer at school...wierd...

-Dan The Man
 
Status
Not open for further replies.
Back
Top Bottom