Rinsler
Solid State Member
- Messages
- 12
- Location
- Bosnia and Herzegovina
Hi everyone, I am new to this, so I'm not really experienced or anything, it might be a stupid question...but what can i do ...so, onto the problem...
My current configuration is:
Intel Core 2 4400 @ 2GHz
Foxconn VIA PT890 Motherboard
RAM: 2GB DDR2
HDD 250GB
Ati Radeon x1550 Series
Recently i bought new graphic card "AMD Radeon 7750 Powercolor 1GB GDDR5 128bit". Since it requires minimum of 400W of power supply, i also bought new PSU "Codegen 400W".
I followed the instructions that came with the graphic card, which means, unplugging all the wires from the case, opening the case, taking the graphic card out of the PCIE socket, placing the new graphic card on the same place (i made sure it fits good as recommended). Plugging the wires back on, start the PC. The fan on the processor works, the fan on graphic card spins also, but I'm not receiving output on the monitor.
It just says that there is no signal. I checked the wires, made sure everything is plugged in the right place. Also, I uninstalled drivers from previous graphic card and checked if the new graphic card is compatible with the PCIE slot version (PCIE 1.0 x16).
I really dont see whats the problem here, can anyone at least make a suggestion of what can the problem be? Maybe there is a conflict with MB? Processor? RAM?, that I dont know of. Any kind of help will be greatly appreciated
My current configuration is:
Intel Core 2 4400 @ 2GHz
Foxconn VIA PT890 Motherboard
RAM: 2GB DDR2
HDD 250GB
Ati Radeon x1550 Series
Recently i bought new graphic card "AMD Radeon 7750 Powercolor 1GB GDDR5 128bit". Since it requires minimum of 400W of power supply, i also bought new PSU "Codegen 400W".
I followed the instructions that came with the graphic card, which means, unplugging all the wires from the case, opening the case, taking the graphic card out of the PCIE socket, placing the new graphic card on the same place (i made sure it fits good as recommended). Plugging the wires back on, start the PC. The fan on the processor works, the fan on graphic card spins also, but I'm not receiving output on the monitor.
It just says that there is no signal. I checked the wires, made sure everything is plugged in the right place. Also, I uninstalled drivers from previous graphic card and checked if the new graphic card is compatible with the PCIE slot version (PCIE 1.0 x16).
I really dont see whats the problem here, can anyone at least make a suggestion of what can the problem be? Maybe there is a conflict with MB? Processor? RAM?, that I dont know of. Any kind of help will be greatly appreciated