joelm3103
Fully Optimized
- Messages
- 1,750
- Location
- -Trinidad- and Tobago, Caribbean.
Scenarios tried:
Two different 4pins (separately, not together), it booted maybe 3/4 the times tried.
Saw my PSU has 4+4 pins to make up the 8pin, so I tried each 4 pin separately and it booted half the time, other half it just hangs like normal with no beeps and the cpu fan just spins but slower than usual (kinda wobble effect I guess).
Tried my 1 half of my 8pin on another machine and it booted up in a single try.
So came to my conclusion it's my board or I'm leaving out other possibilities?
Mind you all these tests were tested naked (nothing connected except PSU) and fully connected, same 50/50 boot on my system but 100 boot on others.
Two different 4pins (separately, not together), it booted maybe 3/4 the times tried.
Saw my PSU has 4+4 pins to make up the 8pin, so I tried each 4 pin separately and it booted half the time, other half it just hangs like normal with no beeps and the cpu fan just spins but slower than usual (kinda wobble effect I guess).
Tried my 1 half of my 8pin on another machine and it booted up in a single try.
So came to my conclusion it's my board or I'm leaving out other possibilities?
Mind you all these tests were tested naked (nothing connected except PSU) and fully connected, same 50/50 boot on my system but 100 boot on others.