Nubius
Golden Master
- Messages
- 11,599
I'm just curious how much jumpiness is usually present when montirong your voltages....
I'm using motherboard monitor 5 to monitor the voltages and my Vcore is set at 1.925 in the BIOS and it jumps from 1.88 up to 1.95 both of those are the lowest and highes it goes, generally it's always moving up or down that much not matter what it's set to, about plus or minus .04 in each direction..does this seem significant at all as by all my calculations my power supply should be quite capable of delivering the needed power including the fact I checked to make sure I wouldn't wear out my +12v rail with all the fans...thanks for the info
I'm using motherboard monitor 5 to monitor the voltages and my Vcore is set at 1.925 in the BIOS and it jumps from 1.88 up to 1.95 both of those are the lowest and highes it goes, generally it's always moving up or down that much not matter what it's set to, about plus or minus .04 in each direction..does this seem significant at all as by all my calculations my power supply should be quite capable of delivering the needed power including the fact I checked to make sure I wouldn't wear out my +12v rail with all the fans...thanks for the info