Corsair TX750M + Gigabyte GA-Z68XP-UD3P compatibility issues

[l8t4meneomatrix]

PSU: Corsair TX750M
http://www.newegg.com/Product/Produc...82E16817139030

Motherboard: Gigabyte GA-Z68XP-UD3P
http://www.newegg.com/Product/Produc...82E16813128506

I'm having problems with starting up by itself. I just get 2 seconds of light and that's about it besides a small buzzing noise from the PSU.

Here's my other components:

CPU: Intel Core i7-2600k
http://www.newegg.com/Product/Produc...82E16819115070

SSD (primary storage device):Corsair Force Series 3 CSSD
http://www.newegg.com/Product/Produc...82E16820233223

HDD (secondary storage device):Seagate Barracuda ST31000524AS 1TB
http://www.newegg.com/Product/Produc...82E16822148697

Memory: Corsair Vengeance 8GB
http://www.newegg.com/Product/Produc...82E16820233142

Case: Corsair 600T
http://www.newegg.com/Product/Produc...82E16811139005

GPU: XFX HD-697A-CNFC Radeon HD 6970
http://www.newegg.com/Product/Produc...82E16814150517

DVD burner: MSI 22X Internal Burner
http://www.newegg.com/Product/Produc...82E16827100057

I made sure I plugged in everything right but the manual for the motherboard says that I have to make sure that the 12V input is inserted, otherwise the motherboard won't start but I couldn't refer to my PSU manual because I didn't receive any and so I tried looking through the supplies that the PSU came with but I only see a blue end of a connector that says "TH/HX Series Only" and the other end says "PCI-E." I assumed that it'll be alright because it didn't have a divider in it but when I turned it on, I didn't even get any lights. Just the same buzzing noise from my previous attempt...

I have the PSU hooked up to both of my hard drives, one in my DVD burner, one hooked up on my motherboard (the huge 12-14 pin connector on the bottom right if you're looking at it with the I/O on the upper-left corner), and two to my GPU.

Any help and/or advice would be appreciated. Thanks in advance.

 

[Talyor]

Try to remove a stick of ram and the video card and see if its the psu. If it doesnt start then the psu must be faulty, Also did you check if you plugged in your CPU Fan pin so the processor can get powered.

 

[Roark]

make sure that the 12V input is inserted

Believe the 12V input is the 8-pin plug in the upper left (just to the right of the I/O)
Your PSU has 2x 4+4-pin plugs, one of them will do the trick.

 

[l8t4meneomatrix]

Try to remove a stick of ram and the video card and see if its the psu. If it doesnt start then the psu must be faulty, Also did you check if you plugged in your CPU Fan pin so the processor can get powered.

thanks I'll try that

 

[l8t4meneomatrix]

Believe the 12V input is the 8-pin plug in the upper left (just to the right of the I/O)
Your PSU has 2x 4+4-pin plugs, one of them will do the trick.

Earlier I mentioned that I tried with the 12V input from the PSU but the got more unfortunate results. Thanks anyways Roark