I recently bought some new bits to make a computer with but it won't switch on. Power is getting to the motherboard as the on/off, reset and clr CMOS buttons all light up.. Its just that nothing happens when I try to start it
The specs are:
PSU: XFX 1000W Black Edition Pro '80+ Platinum' Certified Modular Power Supply
MOBO: Gigabyte 990FXA-UD7 AMD 990FX (Socket AM3+) DDR3 Motherboard
CPU: AMD Phenom II X4 Quad Core 975 Black Edition "125W Edition" 3.60GHz (Socket AM3)
GC: Sapphire ATI Radeon HD 6850 1024MB GDDR5 PCI-Express Graphics Card
CASE: NZXT Phantom Enthusiast Full Tower Case - Black
Optical: Samsung SH-B123L/BSBP 12x BluRay ROM / 16x DVD±RW Lightscribe SATA-II Optical Drive - Black
RAM: Corsair Vengeance Low Profile 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit (CML8GX3M2A1600C9)
HDD: 640GB SATA HDD
The things that I've checked myself are that the powersupply was plugged in and on, the fans are all connected, the F_PANEL connections are all in the right place, the HDD and optical drive are connected to the power supply and have SATA cables to the motherboard, the motherboard is on standoffs and there are no extra ones in the wrong place and that the CPU fan, fan 1 and fan 2 headers are all connected. Everything is literally only just out of the box and I used one of the wrist straps to prevent static discharge, does anybody have any ideas as to wha might be wrong? I think I set it up in the same way as the computer I'm using, it just won't switch on...
Any help would be appreciated
Happy holidays
EDIT:
Sorry, but nevermind. I tried to take the fan on the processor off to make sure the processor is the right way round and the processor was stuck to it so tightly that it came out with it. The pins got damaged and I'm not able to get another so just going to sell the components and give up .
The specs are:
PSU: XFX 1000W Black Edition Pro '80+ Platinum' Certified Modular Power Supply
MOBO: Gigabyte 990FXA-UD7 AMD 990FX (Socket AM3+) DDR3 Motherboard
CPU: AMD Phenom II X4 Quad Core 975 Black Edition "125W Edition" 3.60GHz (Socket AM3)
GC: Sapphire ATI Radeon HD 6850 1024MB GDDR5 PCI-Express Graphics Card
CASE: NZXT Phantom Enthusiast Full Tower Case - Black
Optical: Samsung SH-B123L/BSBP 12x BluRay ROM / 16x DVD±RW Lightscribe SATA-II Optical Drive - Black
RAM: Corsair Vengeance Low Profile 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit (CML8GX3M2A1600C9)
HDD: 640GB SATA HDD
The things that I've checked myself are that the powersupply was plugged in and on, the fans are all connected, the F_PANEL connections are all in the right place, the HDD and optical drive are connected to the power supply and have SATA cables to the motherboard, the motherboard is on standoffs and there are no extra ones in the wrong place and that the CPU fan, fan 1 and fan 2 headers are all connected. Everything is literally only just out of the box and I used one of the wrist straps to prevent static discharge, does anybody have any ideas as to wha might be wrong? I think I set it up in the same way as the computer I'm using, it just won't switch on...
Any help would be appreciated
Happy holidays
EDIT:
Sorry, but nevermind. I tried to take the fan on the processor off to make sure the processor is the right way round and the processor was stuck to it so tightly that it came out with it. The pins got damaged and I'm not able to get another so just going to sell the components and give up .