Hi
Thanks for the reply.....
My budget is about £80 to £ 100 and no i'm not looking to buy anything else except the motherboard and then hoping that everything I already have on my old broken motherboard will just transport across to the new board.
I have a jeantech gaming aqua case and I think the ventelation is good with 3 fans in it, as for size.....
Form Factor : ATX/Micro ATX
Expansion slots : 7
Total Drive Bays : 10
5.25 Drive Bays : 4
3.5 Drive bays : 2
3.5 Drive Bays (Hidden) : 4
Total Fan Space : 4
Screwless : Yes (5.25 & 3.5)
accessories box : Yes
Colour : Black & Silver
Fan : 1x120 mm blue LED (include)
Front USB ports : 2
Front Firewire (1394) ports : No
Front Audio/Mic ports : Yes
Weight : 10.5 Kg Dimensions (WxDxH) : 52.25 x 20.5 x 45 CM
º Socket AM2 for AMD Athlon 64 X2 Dual Core/ Athlon 64 FX/Athlon 64 processor
º High-performance Hyper Transport CPU interface.
º AMD Cool 'n' Quiet™ Technology
º Support transfer rate of 2000/1600/1200/800/400 mega-transfers per second.
|
º NVIDIA nForce 590 SLI MCP
• North Bridge:C51XE
• South Bridge:MCP55XE
|
º Dual-channel DDR2 memory architecture
º 4 x 240-pin DDR2 DIMM socket support up to 32GB*
º Support DDR2 800/667/533/400 DDR2 SDRAM
º * (Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 8GB)
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows[SUP]®[/SUP] 32-bit OS.
For Windows[SUP]®[/SUP] 64-bit OS with 64-bit CPU, there is no such limitation
|
º 2 x PCI Express x16 slot (SLI mode: 16X, 16X)
º 2 x PCI Express x1 slots
º 2 x PCI slots
|
º Support by MCP55XE
• 1 x Ultra DMA133/100/66/33 port
• 6 x Serial ATAII 3.0Gb/s devices(SATA 6 as eSATA & Hot Plug)
• supports RAID 0, 1, 0+1, 5, JBOD and NCQ
º Supported by JMB363 • 1 x Ultra DMA133/100/66 port
• 2 x Serial ATA 3.0Gb/s devices
• RAID0, RAID1& RAID 0+1 configuration
• Support NCQ&eSATA & Hot plug&Port Multiplier
|
º Realtek ALC883 8-channel audio CODEC
º Compliant with HD audio specification
|
º VIA[SUP]®[/SUP] VT6308P support 2 x IEEE1394a ports
|
º Marvell 88E1116 Gigabit Fast Ethernet PHY x2
|
º 1 x PS/2 keyboard & PS/2 mouse connectors
º 1 x Serial port (COM1)
º 1 x External SATA port
º 4 x USB ports
º 2 x RJ45 LAN connectors
º 1 x Audio port (Line-in,4x Line-out, Mic_in)
|
º 1 x 24-pin ATX Power Supply connector
º 1 x 4-pin ATX 12V connector
º 1 x Auxiliary 4-pin +12V connector
º 1 x FDD connector
º 2 x IDE connectors
º 1 x IrDA for SIR header
º 1 x Speaker header
º 2 x 1394a headers
º 3 x USB 2.0 headers support additional 6 USB ports
º 1 x S/PDIF out header, 1 x CD-in header
º 7 x Serial ATA connectors
º 1 x 26-pin LPT header
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º 1x CPUFAN/1x SYSFAN/3x CASFAN connectors
|
º Award BIOS with 4Mb Flash ROM
º Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
º Full support for ACPI revision 2.0 specification
|
FORM FACTOR [TD="class: table2_frame4 table_padding content left_middle"]º ATX Size, 305mm*244mm
|
CHIPSET
MEMORY
EXPANSION SLOT
STORAGE
AUDIO
IEEE 1394a
DUAL LAN
REAR PANEL I/O
INTERNAL I/O CONNECTORS & HEADERS
SYSTEM BIOS
KN3 SLI2 (V1.0)
Supports Support AMD Socket AM2 Cpu
[/TD]
NVIDIA nForce® 590 SLI™ MCP chipset that supports NVIDIA® SLI™ technology support, at full x16, x16 speed
Extreme overclocking and unprecedented control over system behavior
Socket dual channel DDR2 800/667/533
Supports SATA 3Gb/s and RAID 0,1,0+1,5 function
Supports Dual Giga LAN & IEEE1394 connection
Supports high quality 8-CH Intel® High Definition Audio
So am simply looking for a new mother board that does the same as the KN3 SLi2 and will take all the components that i currently have.....
Hope this is a bit more helpful.....
Many Thanks
Neil