New build CPU problems

Status
Not open for further replies.

dagr81

Baseband Member
Messages
26
I just finished my 1st build.
i have 2 problems
one is that the cpu is running to hot 56C no load and the fan is loud
also the computer only lets me start it once. if i need to start it again
I need to unplug it form the wall then plug it back on


going to grab some past now see if i can reset the fan
specs

mother b p8 ps7pro
cpu i5 2500k
gpu radeon 6950
1T WD black HD
ps tx750
ssd ocz 120gb
corsair vengeance 8g mem
 
ok it seem to be at 50C. the fans seem to be working now its no longer make that sound anymore.
but 50C is still to hot
I also seem to be having a problem where i can't turn the computer on after i shut it back down.
have to take out the power from the PSU then restart. what do you think is causing that problem?
 
How are you shutting down? from a switch or by wiundows?

What happens when it tries to shut down?

Need more info to hrelp you?

On the temp, load up cpu-z and see what your Vid is.
 
Are you using the stock heatsink or an aftermarket? It sounds like the heatsink isn't sitting flat on the cpu or you've used to much thermal paste.
 
Status
Not open for further replies.
Back
Top Bottom