Project: Corsair Graphite 600T MbK

[madebykier]

Hello my name is Richard aka Kier
I'm an enthusiastic modder from the Netherlands
This is my first post overhere, and hope you like my skills

Sponsored by:

To much time and a little addicted………………… this gives me the opportunity to start another build
This time the great Corsair Graphite 600T. Love this case, nice shape and good quality
The hardware i'm gonna use:

Case: Corsair Graphite 600T
Motherboard: Asrock Z68 extreme 4
CPU: i5 2500K
GPU: Asus GTX 580
PSU: Coolermaster Silent pro M 1000W

And more………………this will been shown in the progress
Offcourse there wil be watercooling

The case is given by IT-Service.be

Corsair Grapithe 600T

Out of the box

Ofcourse right away disassembling the Corsair

Taken off the front

There is a plastic rim on the front which also came off, maybe i'm gonna do something with it

Back is removable also

And the top

Nice panel

And the case without the plastic

 

[madebykier]

Oww almost forgot, the hdd racks are easily removable

Almost nothing left

First modification. For this i've used 3M Di-Noc CARBON FIBER FILM

3M Di-Noc CARBON FIBER FILM



First done the control panel and the narrow strips on the sides

After that did one sidepanel with the carbon film

For now this was the start, more to come when I have some more hardware

Grtz.

 

[patonb]

Is that the CC600TM case? If so, is the fan the same as the 650D?

 

[Slaymate]

Welcome to Tech-Forums

 

[jfenwick]

I like your photo setup, I'm looking at a new camera, what frame and lense(s) are you using?

 

[madebykier]

Is that the CC600TM case? If so, is the fan the same as the 650D?

Hi, just the normal Corsair Graphite 600T, dont know if they are the same?

Welcome to Tech-Forums

Thank you, good to be here

I like your photo setup, I'm looking at a new camera, what frame and lense(s) are you using?

Thnx, I'm using A Sony A300 with a Sigma 17-70mm 1:2.8-4.5
tripod, Iso100 and always with day light..........no flashlight

 

[madebykier]

Hi, my modding friends
Today I did some nice things to the 600T
For this I have 2 Black Ice GT Stealth 240 rads

And Coolermaster has given me 4 very good fans. The Turbine Master Mach 0.8

I'm going to place 2 of these on top of the 600T

Need to take of the cap for the mesh panel otherwise it don't fit

Beneed the Turbine masters I am gonna place 1 black ice rad

The other two turbine nasters are coming in the front

Going to place the second rad inside

It dont fit, so have to cut a piece out of the bay

Back to the top again. I think it's not finished..............so it's acryl time
For this IT-service has send me a beautiful piece of 5mm UV blue acryl

Marked for cutting

And cut it

Cut the little pieces out

Still need to file this

And it fits

Mesh cover placed

Next step, marked the fans

 

[madebykier]

Did the cutting with my hightech fretsaw

Without the tape. Hmm looks like .....................

And placed the Turbine masters

The idea is to past black film over the acryl with blue lines visible

That's it for now, more to come. Grtz.

 

[patonb]

Very nice.. I believe the differenced between the T and TM is the 200mm fan update... but youre not using them anyway.

 

[Sean W.]

wow, really nice job so far, i really like what you did with that plastic. keep up the good work!