Cool, I looked at it a few months ago... obviously, I need a refresher course.
So I got the BCLK stable at 154 and 64 degrees max. I moved it up to 158 BCLK and got the following results with LinX:
VCore 1.29375, crash at 3:16, 66 degrees
VCore 1.3, crash at approximately 1 minute (I forgot to write the exact numbers down)
VCore 1.30625, crash at 8:09, 66 degrees
VCore 1.3125, crash at 8:03, 66 degrees
VCore 1.31875, crash at 8:13, 66 degrees
VCore 1.325, crash at 16:31, 68 degrees
VCore 1.33125, crash at 5:46, 71 degrees
Is it weird that the time went WAY down with that last VCore adjustment? Is there something else I should be changing? If not, I'm going to have to back down a notch, because it is hitting over 70 degrees. Are there ways to lower the heat, for example, would you possibly get different temps if you jacked up the multiplier instead of the BCLK, or is it all the same in the end?
Finally, when should I start adjusting the memory multiplier? My memory is only at 1580 with a 158 BCLK, so there's a lot of headroom to 2000.