Afternoon all!
I recently bought a new cd driver Newegg.com - HP Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM SATA 24X Multiformat DVD Writer and a new computer case Newegg.com - COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower Computer Case. I went to boot up and my BIOS POST message lasted for roughly 5-7 mins. I reformated and I'm still having the problem, which wasn't the case before installation of the new products. The messages I'm getting are below. This is the first step in learning how to build computers/fix problems... obviously slow in progress.
I've tried different sata cables and I've unplugged the dvd driver, which did resolve the HP DVD Writer problem. I've ran out of ideas and have ran into dead ends on researching problems on the internet. What can I do, if anything, to fix this problem?
BIOS Post Message
Auto-Detecting Pri Master..IDE Hard Disk
Auto-Detecting SATA2..ATAPI CD-ROM
Pri Master : ST3120026a 8.01
Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK
SATA2 Hard Disk: HP DVD Writer 1270t CH23
Ultra DMA Mode-5
Auto-detecting USB Mass Storage Devices ..
00 USB mass storage devices found and configured.
Computer Spec
Mainboard : Asus M3A32-MVP DELUXE
Chipset : AMD 790FX
Processor : AMD Athlon 64 X2 6000+ @ 3000MHz
Physical Memory : 2048MB (2 x 1024 DDR2-SDRAM )
Video Card : NVIDIA GeForce 8800 GT
Hard Disk : Seagate ST3120026A (120GB)
DVD-Rom Drive : Hewlett-Packard DVD Writer 1270t
Monitor Type : ViewSonic VA721 - 17 inches
Network Card : Marvell Semiconductor (Was: Galileo Technology Yukon 88E8056 PCIe Gigabit Ethernet Controller
Operating System : Microsoft Windows XP Home Edition 5.01.2600 Service Pack 3 (32-bit)
Thanks.
I recently bought a new cd driver Newegg.com - HP Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM SATA 24X Multiformat DVD Writer and a new computer case Newegg.com - COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower Computer Case. I went to boot up and my BIOS POST message lasted for roughly 5-7 mins. I reformated and I'm still having the problem, which wasn't the case before installation of the new products. The messages I'm getting are below. This is the first step in learning how to build computers/fix problems... obviously slow in progress.
I've tried different sata cables and I've unplugged the dvd driver, which did resolve the HP DVD Writer problem. I've ran out of ideas and have ran into dead ends on researching problems on the internet. What can I do, if anything, to fix this problem?
BIOS Post Message
Auto-Detecting Pri Master..IDE Hard Disk
Auto-Detecting SATA2..ATAPI CD-ROM
Pri Master : ST3120026a 8.01
Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK
SATA2 Hard Disk: HP DVD Writer 1270t CH23
Ultra DMA Mode-5
Auto-detecting USB Mass Storage Devices ..
00 USB mass storage devices found and configured.
Computer Spec
Mainboard : Asus M3A32-MVP DELUXE
Chipset : AMD 790FX
Processor : AMD Athlon 64 X2 6000+ @ 3000MHz
Physical Memory : 2048MB (2 x 1024 DDR2-SDRAM )
Video Card : NVIDIA GeForce 8800 GT
Hard Disk : Seagate ST3120026A (120GB)
DVD-Rom Drive : Hewlett-Packard DVD Writer 1270t
Monitor Type : ViewSonic VA721 - 17 inches
Network Card : Marvell Semiconductor (Was: Galileo Technology Yukon 88E8056 PCIe Gigabit Ethernet Controller
Operating System : Microsoft Windows XP Home Edition 5.01.2600 Service Pack 3 (32-bit)
Thanks.