iBuypower or Build?

Status
Not open for further replies.
F3-12800CL7D-4GBRM = cas latency of 7, runs at 1.65V

F3-12800CL9D-4GBRL = cas latency of 9, runs at 1.5V

I am running the F3-12800CL7D-4GBRM and can vouch for them.
 
So is it TOOO much of a performance loss between the two?

I'll get the CL7D's if it's a difference I can notice, but you know it's always nice to save.
 
Alright then, I'll just get the $50 ones, thanks.

Here's how everything looks so far with HDD CD Drive motherboard VGA switch card and I believe that's it.


2dl87wh.jpg


28tcop3.jpg




Had a bit of trouble installing the Seagate hardrive. At first I made it so that the little hard drive brackets closed on the sata and power ports (really dumb of me) because how would I plug it in? So I turned it around and got it in. Now the HAF 922 drive brackets have like 4 small nails on each side but there's still space to insert a nail in the middle of the drive of both sides, but the drive is secure where it is, so do I leave it like that?

Really loving this case so worth the $100.
 
Hmm alright I'll do that, hopefully it's long enough.

I'll upload more pics once the processor is inside, only missing CPU GPU PSU and ram.
 
My router is the AT&T Uverse gateway router.

Not sure if it makes a difference to what you will suggest me :

3800GV-B Goes up to G B and B/G modes.

also, do you know of any similar to those, that are USB instead of connected to mobo?
 
Status
Not open for further replies.
Back
Top Bottom