well there is no psu shot, and that case is soooo easy for wire management. On a technical level id say 9 because it is very neat. But on a practical level 8-8.5 .
Doesn't matter how easy/hard a case is for wire management, it's too hard to rate subjectively. Without seeing an entire case shot, I'd say 9.3/10. Very nice work
I give it an 8.99 because the cables aren't sleeved
Mine's way worse, but at least it's (badly) sleeved. I think my management in my old 310 was better.
ignore the wire run across the side- that's for the case side panel fan that was pushed aside for the pic.
^dude, with a HAF you should be able to do much better. Fix up the wire coming from the CPU fan, fix up the sata cables, get the power cables coming out of the PSU less tangled and bundle them nicely. 6.9/10
Doesn't matter how easy/hard a case is for wire management, it's too hard to rate subjectively. Without seeing an entire case shot, I'd say 9.3/10. Very nice work
^dude, with a HAF you should be able to do much better. Fix up the wire coming from the CPU fan, fix up the sata cables, get the power cables coming out of the PSU less tangled and bundle them nicely. 6.9/10
I was kinda out of it by the time I messed with the cables... I had been working on it for 6 hours straight. I know I should do much better. I'm worried about even opening the side panel, though- there are so many PSU cables behind that mobo tray that it was extremely difficult to close it. The cables coming off the PSU actually aren't that bad, though- the bad sleeving job makes them look worse. And what's wrong with the CPU cooler cable? That's like the most neglible thing out of that entire mess... maybe the SATA cables or the Molex cables behind the HDD cage, but the HSF??