you cannot use DDR2 in a DDR3 slot.Thanks for the advice, but the first thing I ordered was 2 x 2GB of RAM DDR2, but I can still get this MB and use them right, and in the future upgrade to DDR3?
cannot use DDR3 in a DDR2 slot either.
you cannot use DDR2 in a DDR3 slot.Thanks for the advice, but the first thing I ordered was 2 x 2GB of RAM DDR2, but I can still get this MB and use them right, and in the future upgrade to DDR3?
you cannot use DDR2 in a DDR3 slot.
cannot use DDR3 in a DDR2 slot either.
The price difference between 200gb and 500gb is tiny i would go with as much space as you can get in your comfortable price range, as for the drive it self i would advise getting at least a 32mb buffer if not a 64mb buffer, and you can use a drive that is a SATA 3mb compatibale, and most of the sata 2 drives are compatiable
i would get the fastest your board can support in this case its 3mb/s so get that for sure
It is better to have spare power than not enough. And go with a decent PSU.
Newegg.com - OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply