I just started overclocking, so this is pretty new to me. I'm trying to overclock to 3.4ghz on air and so far I'm at 3ghz with an aftermarket cooler with temps no higher than 58C running intel burn test. So far by only changing fsb to 375, ram is 1.8volts 5-5-5-18 750mhz(a data ddr2 800mhz, supposedly gaming ram with the red heat spredder) and some other options listed below. I'm wondering if anyone has experience with this setup and can look over what i did so far and give some insight on getting to 3.4ghz? I typed out the settings I changed, let me know if you need more info.
cpu enhanced halt (c1e)=disabled
cpu thermal monitor (tm2)=disabled
cpu eist function=disabled
load-line calibration=enabled
cpu vcore=was auto changed to normal
cpu termination=was auto changed to normal
cpu pLL=was auto changed to normal
cpu reference=was auto changed to normal
mch core=was auto changed to normal
mch reference=was auto changed to normal
mch /dram reference=was auto changed to normal
ich i/o=was auto changed to normal
ich core=was auto changed to normal
dram voltage=was auto changed to normal
dram termination=was auto changed to normal
channel a reference=was auto changed to normal
channel b reference=was auto changed to normal
cpu enhanced halt (c1e)=disabled
cpu thermal monitor (tm2)=disabled
cpu eist function=disabled
load-line calibration=enabled
cpu vcore=was auto changed to normal
cpu termination=was auto changed to normal
cpu pLL=was auto changed to normal
cpu reference=was auto changed to normal
mch core=was auto changed to normal
mch reference=was auto changed to normal
mch /dram reference=was auto changed to normal
ich i/o=was auto changed to normal
ich core=was auto changed to normal
dram voltage=was auto changed to normal
dram termination=was auto changed to normal
channel a reference=was auto changed to normal
channel b reference=was auto changed to normal