SirCyber
Daemon Poster
- Messages
- 1,114
- Location
- In a yellow Submarine
Ok... I'm looking to OC my Core i7... I know I know I know, how many of these do we need?
well here's my hangup. I increased my v-core to 1.325, and based off the video I was watching, well, he wasn't using EVGA E-Leet Tuning Utility as I am, so things... didn't match up. I have sliders in the Overclocking Tab
Clocks Control
QPI -----------------I--------------------------------------[<][>]
PCI-E -----------------I--------------------------------------[<][>]
Turbo Mode Control
Core1 x23 -----------------i---------------------------------[<][>]
Core2 x22 ---------------I-----------------------------------[<][>]
Core3 x22 ---------------I-----------------------------------[<][>]
Core4 x22 ---------------I-----------------------------------[<][>]
Voltages=
VCORE 1.325
IOH/ICH I/O Voltage 1.5
ICH VCore 1.05
QPI PLL VCore 1.8
CPU PLL VCore 1.8
IOH VCore 1.1
CPU VTT Voltage 1.2
DRAM Voltage 1.5
Ok, now that I have this all set so you know where I'm at... I don't know anything about what I'm doing. I've read the basics, but I honestly don't know where to begin. the vcore, that was easy to understand. the rest... I know how to change the multiplier, do I need to change ALL the cores? and what about what it's multiplying? is that the QPI?
Sorry for yet another OC thread, I'm just confused and this way I can go through my trials and tribs myself with some guidance.
well here's my hangup. I increased my v-core to 1.325, and based off the video I was watching, well, he wasn't using EVGA E-Leet Tuning Utility as I am, so things... didn't match up. I have sliders in the Overclocking Tab
Clocks Control
QPI -----------------I--------------------------------------[<][>]
PCI-E -----------------I--------------------------------------[<][>]
Turbo Mode Control
Core1 x23 -----------------i---------------------------------[<][>]
Core2 x22 ---------------I-----------------------------------[<][>]
Core3 x22 ---------------I-----------------------------------[<][>]
Core4 x22 ---------------I-----------------------------------[<][>]
Voltages=
VCORE 1.325
IOH/ICH I/O Voltage 1.5
ICH VCore 1.05
QPI PLL VCore 1.8
CPU PLL VCore 1.8
IOH VCore 1.1
CPU VTT Voltage 1.2
DRAM Voltage 1.5
Ok, now that I have this all set so you know where I'm at... I don't know anything about what I'm doing. I've read the basics, but I honestly don't know where to begin. the vcore, that was easy to understand. the rest... I know how to change the multiplier, do I need to change ALL the cores? and what about what it's multiplying? is that the QPI?
Sorry for yet another OC thread, I'm just confused and this way I can go through my trials and tribs myself with some guidance.