Would not turn on

Status
Not open for further replies.

Kdar

Daemon Poster
Messages
894
My other computer would not turn on at all.

If I reset power supply and try to turn on again, the CPU fan moves a little bit, maybe 1cm and then come back to initial condition (without computer turning on).

What can I do to fix this?

I know this is not PSU, I tried another one, same thing happened.

I tried to reset everything.

--

I also tried to run it with only 1 stick of ram and CPU.
Same thing
 
^ what do you mean you tried to run it with only one cpu? (are you running a skul lsetup or something lol)

Have you tried resetting the cmos?
Try taking out all the parts except the cpu and heatsink (obviously leave the psu in there)...could be one of those parts shorting out the mobo.

Try doing a bench test after that (running the computer outside the case on a non conductive service (wood, carboard, etc)
 
Try taking out all the parts except the cpu and heatsink (obviously leave the psu in there)...could be one of those parts shorting out the mobo.

thats what I did when I said 1 stick of ram and CPU. I have the case open now.

even without memory. still, would not turn on.
 
ohhh, i thought you meant you took out all the ram except one stick, then took out all but one cpu lol.

Well cmos and bench test mate.
 
Run Memtest on the RAM.

Have you done anything different to the computer - upgraded hardware, anything? Reset the CMOS battery to see if that fixes it.
 
Status
Not open for further replies.
Back
Top Bottom