Techist - Tech Forum - View Single Post - I7930@20X200 4ghz will i get higher?

Click Here to Login
View Single Post
Old 04-11-2010, 02:39 PM   #5 (permalink)
True Techie
Join Date: Feb 2010
Posts: 110
Default Re: I7930@20X200 4ghz will i get higher?

i might have used too much paste. i applied paste in middle of cpu and tighten and checked for coverage. or is it better to evenly spread paste by hand? theres a screw on my radiator i think its the bleeder. gonna see if theres air in it.. i have a feser 360 rads with 3x 1600rpm slipstreams fancontoller at 100%
the loop consists of the cpu block, EK full board block (NB/SB and VREG) and dual bay reservoir.
how are my VREG temps? it maxed out at 71 celcius.
could it be my voltages are too high like you said? cuz before i was also at 20x200 4ghz and my temps were 60-68 but i failed linx at 7minutes so i upped the voltage to pass linx but got those higher temps of 72-77. gotta check my bleeder, lower the voltages and post again
EVGA E760 Classified BIOS S664
i7-930 @ 4.2ghz
6GB Mushkin Redline 998750 @2010mhz 8-8-7 24
Antec TPQ-1200w
Triple Vertex-2 Raid 0 FW1.1 / 640 WD Blacks Raid 0
750 WD Black
X-Fi Titanium Fatal1ty
Astro Gaming A40 system
Win7 x64
eagle5968 is offline  

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 09:31 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.