Lapped My TRUE
- Thread starter Luke
- Start date
- Status
OP
OP
Luke
Golden Master
- Messages
- 5,605
- Location
- Vancouver, Canada
yeah, i have what i believe a stable oc for 3.9 right now, but it seems to crash randomly some times, like it will be stable, then bam, it crashes. I think i might have like a voltage too low or something (slay, you have the same mobo as me, what voltages are you running? we have a pretty similar setup so your voltages will probably work for me)
OP
OP
Luke
Golden Master
- Messages
- 5,605
- Location
- Vancouver, Canada
linx...
I run the i7 920 in my Office Workstation at 4GHz using these settings.
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 201 )
MCH Strap ( 1600 MHz )
CPU Uncore Frequency (Mhz) ( 3221 Mhz { 16X } )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 106 )
OC Recovery ( Enabled )
Memory Feature
Memory Speed ( Std. )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 )
Rank Interleave Setting ( 4 )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 24 )
tRFC Setting ( 54 )
Command Rate ( 1 )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.30625v )
CPU VTT Voltage ( +250mV )
CPU PLL VCore ( 1.725v )
DIMM Voltage ( 1.65v )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.3v )
IOH VCore ( 1.375v )
IOH/ICH I/O Voltage ( 1.625v )
ICH VCore ( 1.3v )
PWM Frequency ( 800 KHz )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
I run my Gamer at 4.2GHz using these settings. There very simular thought the Classified has a few extra options.
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 201 )
MCH Strap ( 1600 MHz )
CPU Uncore Frequency (Mhz) ( 3221 Mhz { 16X } )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 106 )
OC Recovery ( Enabled )
Memory Feature
Memory Speed ( Std. )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 )
Rank Interleave Setting ( 4 )
Memory Low Gap ( 2G )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 24 )
tRFC Setting ( 54 )
Command Rate ( 1 )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.30625v )
CPU VTT Voltage ( +250mV )
CPU PLL VCore ( 1.8v )
DIMM Voltage ( 1.65v )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.375v )
IOH VCore ( 1.375v )
IOH/ICH I/O Voltage ( 1.625v )
ICH VCore ( 1.3v )
VTT PWM Frequency ( 250 KHz )
CPU PWM Frequency ( 1333 KHz )
CPU Impedence ( Less )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 201 )
MCH Strap ( 1600 MHz )
CPU Uncore Frequency (Mhz) ( 3221 Mhz { 16X } )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 106 )
OC Recovery ( Enabled )
Memory Feature
Memory Speed ( Std. )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 )
Rank Interleave Setting ( 4 )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 24 )
tRFC Setting ( 54 )
Command Rate ( 1 )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.30625v )
CPU VTT Voltage ( +250mV )
CPU PLL VCore ( 1.725v )
DIMM Voltage ( 1.65v )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.3v )
IOH VCore ( 1.375v )
IOH/ICH I/O Voltage ( 1.625v )
ICH VCore ( 1.3v )
PWM Frequency ( 800 KHz )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
I run my Gamer at 4.2GHz using these settings. There very simular thought the Classified has a few extra options.
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 201 )
MCH Strap ( 1600 MHz )
CPU Uncore Frequency (Mhz) ( 3221 Mhz { 16X } )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 106 )
OC Recovery ( Enabled )
Memory Feature
Memory Speed ( Std. )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 )
Rank Interleave Setting ( 4 )
Memory Low Gap ( 2G )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 24 )
tRFC Setting ( 54 )
Command Rate ( 1 )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.30625v )
CPU VTT Voltage ( +250mV )
CPU PLL VCore ( 1.8v )
DIMM Voltage ( 1.65v )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.375v )
IOH VCore ( 1.375v )
IOH/ICH I/O Voltage ( 1.625v )
ICH VCore ( 1.3v )
VTT PWM Frequency ( 250 KHz )
CPU PWM Frequency ( 1333 KHz )
CPU Impedence ( Less )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
OP
OP
Luke
Golden Master
- Messages
- 5,605
- Location
- Vancouver, Canada
tried those settings out, would not even boot, so i tweaked them a bit, but then i was erroring in lix (at only going for 4.0ghz) i thought it maybe a vcore issue, so i slowly went all the way up to 1,33750, still erroiring (pll vcore at 2.1 as well) any ideas? I have not actually crashed or bsoded or anything just its eroring before it finishes. Usually within the first 30s, and multiple times on 17s for some reason.
Leave the CPU PLL alone, lower it a notch if anything. Try raising the CPU VTT. Adjust your memory latencies to what is recommended for your memory, not what I have listed. Have you been watching your temps while testing LinX? What are they peaking at? And what is your Vreg Temp doing under load? Use HW Monitor. Exactly which mobo do you have? Are you using the latest Bios?
- Status
