Nubius
Golden Master
- Messages
- 11,599
So finally after getting the right motherboard and getting rid of a hair that made my computer not POST I finally got to play with my new 35w 2400+ XP-M and abit motherboard. I only wanted to reach 200FSB so I could finally run my PC3200 ram at a 1:1 ratio with the CPU so I haven't tried REALLY pushing the chip or anything at this point but I'm pretty sure I got some head room. So here's my specs!
11.5x200 = 2.3GHz
1.525 Vcore
Idle Temp: 30C
IQYHA Stepping
I don't have a LOAD temp yet because I haven't run prime95 yet but I'm going to here in about 5 mins then i'll update later with load temps. I raised the vcore from it's default 1.5 to 1.525 just to give myself a little headroom, I didn't have any instabilities or anything like that as of yet, but like I said it's not prime95 tested yet.
Here's my screenshot!
11.5x200 = 2.3GHz
1.525 Vcore
Idle Temp: 30C
IQYHA Stepping
I don't have a LOAD temp yet because I haven't run prime95 yet but I'm going to here in about 5 mins then i'll update later with load temps. I raised the vcore from it's default 1.5 to 1.525 just to give myself a little headroom, I didn't have any instabilities or anything like that as of yet, but like I said it's not prime95 tested yet.
Here's my screenshot!