PLZ help with build

[Burn]

Airflow direction is down. The black fans are pushing air into the radiator, the LED fans are pulling it out of the radiator, inside the case. I did that so my rad could get nice cool air outside the case instead of warm air inside it.

The fans on the bottom rad are pushing air down (outside) the case. My case airflow kind of goes against regular convection, but whatever lol. I'll probably change it one of these days.

I haven't installed my DDC+top yet so I'll get some pic's up in a few minutes.

edit: pics
http://i265.photobucket.com/albums/ii206/Nauubted/P1010117.jpg
http://i265.photobucket.com/albums/ii206/Nauubted/P1010116.jpg

This is the EK X-Top V2, not the XSPC Res top I linked in my above posts.

 

[tdot-mex]

looks good post the pics wen u get them
cheers

 

[Burn]

??

I posted them... See above...

 

[tdot-mex]

i just read it again sorry i thought u were gunna put it in the comp and take pics, looks good tho thanks for all the help also what kind of stuff can i use to make the water glow, i wanted it to glow green

 

[Burn]

don't use additives... overtime they break down and clog up your loop

just get colored tubing:
PrimoFlex Pro LRT UV Green Tubing -1/2in. ID X 3/4in. OD Products Model: PFLEXP-34-G [PFLEXP-34-G] : Performance-PCs.com, ... sleeve it and they will come

 

[tdot-mex]

ok cool , what kind of uv lighting would i use??

 

[Burn]

most people use cold cathodes...

something like this:
Sunbeam Cathode Light Kit Sleeved - White [CCFLWHITE] : Performance-PCs.com, ... sleeve it and they will come

color is personal preference

 

[tdot-mex]

thanks for all the help man i really appreciate it, u were really helpful.

cheers

 

[Burn]

no problem man if you have any other questions just ask

 

[tdot-mex]

sorry forgot to ask but should i use teflon tape for mounting the barbs??