Routing of other cables (3.5 bay has the extra cables stuffed into it):
The 80mmx80mmx15mm fan between the motherboard tray and the right side panel:
Up and running:
Just noticed I didn't take a shot of the whole case when it was finished, I'll take one the next time I have it open.
I know the 850w is overkill for what I have installed now, but I didn't feel comfortable with the added parts on my old PSU. This way I won't have to buy another PSU for my next upgrade.
Temps are very good, CPU on idle is about 19*C (that's with CPU clock knocked down to 1092mhz from not being used) compared to about 32*C from the old setup. Ran Prime95 for 44mins, temp never went above 30*C (that's at normal operating frequency then). GPU idle is at 37*C compared to about 50*C on stock cooling. Ran FurMark for about 15 minutes and the highest temp was 50*C.
Overall I'm very pleased with the way this turned out, I'll wait a week or two before I begin oc'ing the processor (want to get the GPU to at least the superclocked version's settings).
Thanks to everyone who helped me choose parts or share opinions, I really appreciate it (should be repped already ).
Glad you got your GPU temps down! Have you attempted at any more overclocks since you've been up and running? I'll be shopping for a new graphics card, as mine started idling at 57*C all of the sudden. I'm going to sell it and pick up a 5770 (hopefully). Also like the case! That's the case coming with my next purchase.