Got my new parts all together, here is the list of new parts:
-Cooler Master 690 case
-Biostar TA690GXE 128M motherboard
-Cooler Master 4-Pack of 120mmx120mm fans
-Silenx 80mmx80mmx15mm case fan
-Sunbeam Core Contact AM2 CPU heatsink
-Sycthe Musashi GPU heatsink
-Windows 7 Home Premium Retail
-Zalman ZM-MFC1 Plus 6-channel fan controller
-2x 18" Rosewill 90* and 180* Sata cables
-Cooler Master Real Power Pro 850w PSU
-Tuniq TX2 on CPU heatsink, GPU heatsink, and top mounted ramsinks
Here are some photos from the build:
New and old case next to each other, tearing the old system apart:
CPU pulled out, CPU heatsink mounted on new motherboard:
GPU heatsink installed, GPU installed on motherboard (I know the ramsinks on the back of the card is a little overboard, but I had extras so I said why not
):
Reflection of the Musashi on the shiny 850w:
Photo of the 5.25 bay, I mounted the fan using the bracket that was originally by the PSU, just used some double sided tape on those tabs and it fits perfect (bracket is turned on it's side):
Wire management on the back panel, kinda messy:
Photo of the PSU from behind:
Rest of the back, had to ghetto route the back fan wire to reach the right side panel where I have the power connector, the expansion slot cover is sideways there, just have to move it a little:
4-pin CPU power cable routing: