AND_YOU_ARE
Fully Optimized
- Messages
- 2,003
- Location
- Potsdam NY, USA
Thanks for the help. I'll look at this later saturday, and i might have another question then. Thanks again.
I understand that you increase the vcore when increasing the fsb, but if i were to change my multiplier to 11.5 and leave the fsb at 200, would i need to increase the vcore? Or is this a bad idea?
I just dled and ran cpu-z
CPU Tab
core speed: 2205.0MHz
Multiplier: 11x
FSB: 200.5MHz
Bus Speed 400.9MHz
Memory Tab
Frequency: 200.5MHz
FSB : DRAM : 1:1